乐泰硅酮胶16

具体价格面议

乐泰16硅酮胶粘剂

PRODUCT DEscriptION
PermatexÒ Black Silicone Adhesive Sealant is a general
purpose, single component, room temperature vulcanizing
gasketing compound, designed for the sealing of
mechanical assemblies. Upon curing from the exposure to
moisture in the air, this non-sagging paste forms a tough,
flexible, waterproof seal of silicone rubber, which resists
aging, weathering and thermal cycling without hardening,
shrinking or cracking.
PRODUCT BENEFITS
· Easy application
· Applied to horizontal or vertical surfaces
· Superior adhesion and flexibility
· Waterproofs
· Insulates
· Unaffected by vibration
· Non-flammable
· Non-toxic

TYPICAL APPLICATIONS
PermatexÒ Black Silicone Adhesive Sealant is an excellent
all-purpose adhesive/sealant for the following materials:
· metal
· Glass
· Wood
· Plastic
· Silicone resin
· Vulcanized silicone rubber
· Ceramics
· Natural and synthetic fibers
· Painted surfaces
Bonds, seals, repairs, mends and secures:
· Weather stripping
· Windshields
· Windows
· Door frames
· Vinyl tops
· Housings and covers

DIRECTIONS FOR USE
For Assembly
1. Remove all previous material from mating surfaces.
PermatexÒ Gasket Remover is recommended for
most materials, not for plastics or painted surfaces.
2. For best results, clean and dry all surfaces with a
residue-free solvent, such as PermatexÒ Brake and
Parts Cleaner.
3. Cut nozzle to desired bead size, 1/16“ to 1/4“ in
diameter. An 1/8” bead is usually sufficient for most
applications.
4. Remove cap, puncture tube or cartridge seal and attach
extension nozzle.

6. Assemble parts immediately while silicone is still wet.
Secure or tighten as required, avoiding excessive
squeeze-out.
7. Re-torque will not be necessary after the product has
cured.
For Cleanup
1. Allow excess material to extend beyond the extension
nozzle or aerosol tip to cure, sealing and protecting the
remaining product from moisture. For reuse, simply
remove the cured product from the tip and exposure
original product for next application.
2. Remove uncured product from parts and hand-tools
with a dry cloth, if skinned over, break film with a dry
cloth to remove as much as possible, and remove the
remaining material with PermatexÒ Gasket Remover
as previously stated.
3. Clean hands with a dry cloth or PermatexÒ Fast
Orange hand cleaner.

PROPERTIES OF UNCURED MATERIAL
Typical Value
Chemical Type Acetoxy silicone rubber
Appearance Black non-sag paste
Odor Mild acetic
Specific Gravity 1.07
Extrusion rate @ 25°C, (grams/min) >220
Flash Point °C, °F >93 (>200)
TYPICAL CURING PERFORMANCE
PermatexÒ Black Silicone Adhesive Sealant cures on
exposure to moisture in the air. The product dries tack free
in 1 hour and fully cures in 24 hours. Cure times will vary
with temperature, humidity and gap. Note: The curing
process can cause corrosion to some surfaces, for critical
applications use the Ultra Series silicones.